| |
|
Dive Rite TransPac Harness
Inspired by a remote dive exploration in Japan where divers had to hike their heavy gear through dry portions of cave to get to the underwater sumps. The explorers also needed the versatility to switch their gear configuration from backmount to sidemount to single tanks (flexibility that a traditional hard backplate does not offer). Designed like a mountaineer’s backpack, the TransPac disperses weight across the hips and back, minimizing shoulder strain. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. A soft backplate accommodates sidemount diving, yet gives appropriate support for single tanks, double tanks or rebreathers. Slots in the backplate fit standard 36-inch cam straps (included) for single tank diving. The modular design allows for customization using an assortment of pockets and accessories, depending on the needs and desires of the individual diver. The TransPac is TransPac Harness
Catalog : Backplates & Harnesses :
#T3000
Where to Buy
Inspired by a remote dive exploration in Japan where divers had to hike their heavy gear through dry portions of cave to get to the underwater sumps. The explorers also needed the versatility to switch their gear configuration from backmount to sidemount to single tanks (flexibility that a traditional hard backplate does not offer). Designed like a mountaineer’s backpack, the TransPac disperses weight across the hips and back, minimizing shoulder strain. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. A soft backplate accommodates sidemount diving, yet gives appropriate support for single tanks, double tanks or rebreathers. Slots in the backplate fit standard 36-inch cam straps (included) for single tank diving. The modular design allows for customization using an assortment of pockets and accessories, depending on the needs and desires of the individual diver. The TransPac is lightweight and flattens easily into a suitcase for travel. The TransPac is designed to be used with any wing in the Dive Rite line. Made in the U.S.A. Not designed to be worn with a metal backplate.
|
|
|
|
| |
|
Oxy Cheq Mach V 18# Wing
Signature Series Wing for Singles. The extremely low profile produces less drag in the water. The Mach V has integrated role control devices eliminating the need for a single tank adaptor. Inflator hose elbow is off center so it will not interfere with the first stage regulator. Complete with roll control so you will not have to use an STA (Single Tank Adaptor) with a OxyCheq backplate. Easy access to bladder via a 360 degree zipper.
The 18 pound is the lowest profile travel wing available.
Design: 360
Outer Shell: Cordura
Inner Bladder: 26.5 Mil (thicker than water bed)
Lift: 18 Pound / 8.2 Kilograms
Hurry, only 2 left!
|
|
|
|
| |
|
55# Vertex Signature Series
Vertex Signature Series for Doubles. Inner Bladder/Single Inflator Wing in 360 degree design. Very streamlined providing for less drag and less energy expended when swimming. This 360 design allows for better trim and buoyancy characteristics than the older horseshoe designs. The 42 Pound version is great for small doubles or rebreathers and the 30 Pound is designed for rebreathers. Having both inflator elbows on the rear of the wings keeps the one elbow from digging into the rear of the divers shoulder and allows easier access to the back up inflator hose.
Design: 360 Degree
Outer Shell: Cordura
Inner Bladder: 25 Mil
Lift: 55 Pounds / 25 Kilograms or 42 Pounds / 19 kilograms or 30 Pounds / 13.6
Item: ROW-04-55 (55 Pounds / 25 Kilograms)
Hurry, only 1 left!
|
|
|
|
| |
|
Dive Rite Basic Harness
This style include shoulder and waist D-rings (shoulder D-rings are bent at a slight angle for better access). The Standard webbing harness is made from a single piece of continuous webbing.
|
|
|
|
| |
|
Dive Rite Deluxe Harness
This style include shoulder and waist D-rings (shoulder D-rings are bent at a slight angle for better access). The Deluxe harness incorporates a built-in cross-chest strap, plus shoulder-strap pivot rings that further increase comfort.
|
|
|
|
| |
|
Dive Rite Aluminum BackPlate
The Aluminum Back Plate incorporate several features including tank cam band slots, doubles mounting slot, mounting slot for 1" or 2" crotch strap, perimeter mounting holes, and a highly polished finish. Perfect for the diver who loves simplicity with a wide range of accessory mounting options. The doubles mounting slot allows easy assembly onto different double tank configurations without bolt line up concerns.
|
|
|
|
| |
|
Dive Rite Stainless Steel BackPlate
The Stainless Steel Back Plate incorporate several features including tank cam band slots, doubles mounting slot, mounting slot for 1" or 2" crotch strap, perimeter mounting holes, and a highly polished finish. Perfect for the diver who loves simplicity with a wide range of accessory mounting options. The doubles mounting slot allows easy assembly onto different double tank configurations without bolt line up concerns.
|
|
|
|
| |
|
Corrugated Hoses
Divers who wear double back mounted tanks often prefer hoses with a low profile elbow that doesn't interfere with a regulator connection to the tank manifold. Many times, coldwater divers desire the longer 16-inch hose to reach past bulky exposure protection. Warm water divers frequently select the shorter 12-inch hose, unless they are large in stature. Recreational divers can benefit from the 16-inch rapid exhaust hose with convenient "pull dump" as well as conventional overhead exhaust. Made in the U.S.A.
|
|
|
|
| |
|
Assembly Screw
The stainless steel assembly screws are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems and sidemount buttplates). Another common use is to secure the wing to the TransPac harness or hard backplate when rigged for a single tank--When the BCD is taken off a single tank (perhaps to swap tanks between dives), the cam straps alone are not enough to keep the wing neatly attached to the harness. Designed to fit through a 3/8" hole, the Stainless Steel Assembly Screws include O-rings that create friction to help keep the screw in place.
Sold as a set of two.
|
|
|
|
| |
|
BCD Power Inflator
Power inflator for use with standard inflation hoses.
|
|
|
|
| |
|
Dive Rite Travel EXP Wing
The Travel EXP from Dive Rite is part of our innovative line of 360 degree, donut-style wings that provide greater stability and control in the water. Now made of tough, 1680 ballistic nylon with a new oval shape, the Travel EXP is a lightweight, small-profile wing that is great for travel and warm-water, single tank diving. The donut-style provides an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim.
At 27lbs/12kg of lift, the Travel EXP can accommodate one 80ft3/12 L tank with additional weight in pockets or a weight belt not to exceed 16lbs. As a part of our modular BCD system, it can be matched with either a TransPac, Transplate or any metal backplate and webbing harness. Available in black with gray side panels. Made in the U.S.A.
|
|
|
|
| |
|
Dive Rite Rec EXP Wing
The Rec EXP from Dive Rite is the flagship of our innovative line of 360 degree, donut-style wings. Donut wings tend to provide greater stability and control in the water, improving diver buoyancy and trim. The Rec EXP is shorter than our traditional Rec wing, which means it now fits a wider range of diver statures, where as our traditional Rec wing is best suited for tall divers or divers who require more buoyancy at the waist.
A hybrid wing, the Rec EXP can be worn on single or double tanks making it one of our most popular wings. When diving single tanks, two clips on each side of the wing attach to D-rings on the backplate, keeping the wing close to the divers body. This avoids the taco effect of the wing wrapping around the tank, away from the diver, which diminishes buoyancy control.
|
|
|
|
| |
|
Dive Rite Voyager EXP Wing
The Voyager EXP from Dive Rite falls right in line with our other EXP models, touting a low-profile, donut-shape design. Streamlined side panels and a minimalist, oval shape create a higher-lift wing that remains unobtrusive instead of bulky. Tie-down (taco) tabs are no longer necessary.
With 40lbs/20 kgs lift the Voyager EXP is designed to accommodate up to one 95 ft3/15 L single tank, which is ideal for cold water diving or for the warm water diver who slings a pony or small stage.
Available in black with gray side panels. Made in the U.S.A.
|
|
|
|
| |
|
Dive Rite Nomad XT Sidemount Rig
Built with the explorer in mind, the Nomad XT Sidemount Rig from Dive Rite is our "off road" model made with a super-tough exterior. The outer panels of the wing are engineered using SuperFabric® brand technology for optimum resistance to punctures and abrasions, while remaining very flexible.
In addition to its rugged exterior, the Nomad XT has the added benefit of being a modular system: the harness, wing, buttplate and crotch stap are all separate elements. This allows the traveling explorer (or any diver wishing to modify their rig) the ability to trade out wings, remove the buttplate or make any fit adjustments necessary to meet the objective of the dive mission.
A longer Gusset Control System (GCS) now allows the diver to control lift by controlling the profile of the wing. This is especially important for divers who wear aluminum tanks when sidemounting or dive the Nomad XT with a single tank. Without the Gusset Control and without using the wing keepers on the waist belt, the Nomad XT delivers a full 60 lbs of lift. Using the GCS and wing keepers, divers are able to streamline the wing's lift according to the tanks they will carry.
The Nomad XT Sidemount Rig comes assembled and includes a TransPac harness, Nomad XT wing, buttplate and 2-inch crotch strap, plus D-ring bungees and chokers. Diver needs to specify TransPac size (M-XXL) when ordering. Available in single or dual bladder. Made in the U.S.A.
|
|
|
|
| |
|
Dive Rite Classic EXP Wing
The Classic EXP from Dive Rite is part of our innovative line of 360 degree, donut-style wings that provide greater stability and control in the water. The Classic EXP is an adjustable lift wing, sporting an optional Gusset Control System cord that can be used to further streamline the wing for wreck penetration or smaller size doubles. The GCS is not a bungee wing because it does not restrict air flow; instead the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its full capacity.
We offer the Classic EXP single (BC4400) wing. Its unique bladder design allows a single bladder Classic EXP to be altered to become a dual bladder wing at a later date, if desired.
At full capacity, the Classic EXP offers 68 lbs/31 kg of lift, accommodating two 104 ft3/17L back mounted cylinders and two 80 ft3/11L stage bottles. The Classic EXP wing is designed for use with the TransPac, Transplate or metal backplates. Available in black with gray side panels. Made in the U.S.A.
Please note: the Classic EXP is designed for use with heavyweight double tanks and is not for use with single tanks.
|
|
|
|
|
 "Dive Rite TransPac Harness")
 "Oxy Cheq Mach V 18# Wing")
 "55# Vertex Signature Series")
 "Dive Rite Basic Harness")
 "Dive Rite Deluxe Harness")
 "Dive Rite Aluminum BackPlate")
 "Dive Rite Stainless Steel BackPlate")
 "Corrugated Hoses")
 "Assembly Screw")
 "BCD Power Inflator")
 "Dive Rite Travel EXP Wing")
 "Dive Rite Rec EXP Wing")
 "Dive Rite Voyager EXP Wing")
 "Dive Rite Nomad XT Sidemount Rig")
 "Dive Rite Classic EXP Wing")
